Manual:HUMMER Hummer H3 Base 2010Page:16154 / 37523



Low and Reverse Clutch Support Disassemble — 2010 Hummer H3 Base, Automatic Service Manual

Low and Reverse Clutch Support Disassemble

    Fig 1: Low & Reverse Clutch Support Components
    GM5705Courtesy of GENERAL MOTORS CORP.
  1. Remove the low and reverse roller clutch race (675) from the low and reverse clutch support (679). Inspect the race for damage and surface finish.
  2. Remove the two low and reverse roller retainer rings (677) and the low and reverse roller clutch assembly (678). Inspect the roller clutch assembly for damaged rollers and broken springs.
  3. Inspect the low and reverse clutch support (679) for loose cam and cam surface finish. Check the support for cracks and damaged lugs.
    4. Fig 2: Low Reverse Roller Clutch Assembly, Clutch Support & Retainer Ring
    GM5706Courtesy of GENERAL MOTORS CORP.
  4. Clean and install the low and reverse roller clutch assembly (678) into the low and reverse clutch support (679). Install the low and reverse retainer ring (677).