Manual:HUMMER Hummer H3 Base 2010Page:16239 / 37523



Transmission Control Replacement — 2010 Hummer H3 Base, Automatic Service Manual

Transmission Control Replacement

Fig 1: Transmission Control
GM1567353Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the floor shift control knob. Refer to Floor Shift Control Knob Replacement .
  2. Remove the console upper trim plate. Refer to Front Floor Upper Console Trim Plate Replacement (LHD w/Manual Transmission) or Front Floor Upper Console Trim Plate Replacement (LHD w/Automatic Transmission) or Front Floor Upper Console Trim Plate Replacement (RHD w/Automatic Transmission) or Front Floor Upper Console Trim Plate Replacement (RHD w/Manual Transmission) .
  3. Disconnect the transmission range selector cable from the floor shift control. Refer to Range Selector Lever Cable Replacement (3.7L)  or Range Selector Lever Cable Replacement (5.3L) .
1 Floor Shift Control Bolt (Qty: 4)
CAUTION: Refer to Fastener Caution .

Tighten:  20 N.m (15 lb ft)
2 Floor Shift Control