Manual:HUMMER Hummer H3 Base 2010Page:17203 / 37523



Installation Procedure — 2010 Hummer H3 Base, Automatic Service Manual

Installation Procedure

    Fig 1: Transmission Vent Hose & Retainers
    GM1302098Courtesy of GENERAL MOTORS CORP.
    IMPORTANT:
    • Ensure the vent is not plugged.
    • Route the vent hose the same way as removed.
    • Ensure the vent hose is free of kinks and is routed clear of sharp objects.
  1. Connect the transmission vent hose (3) to the transmission vent tube (4).
  2. Connect the transmission vent hose retainer (1, 6) to the following:
    • The heater pipe bracket (2)
    • The transmission range selector cable bracket (5)
  3. Lower the vehicle.