Manual:HUMMER Hummer H3 Base 2010Page:18753 / 37523



Front Floor Upper Console Trim Plate Replacement (RHD w/Manual Transmission) — 2010 Hummer H3 Base, Automatic Service Manual

Front Floor Upper Console Trim Plate Replacement (RHD w/Manual Transmission)

Fig 1: Front Floor Upper Console Trim Plate (RHD W/Manual Transmission)
GM1863808Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Console Upper Trim Plate
CAUTION: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers.

Tip:  Shifter bezel and console upper trim plate must be remove as one assembly.
2 Manual Shift Handle Screw
CAUTION: Refer to Fastener Caution .

Procedure

  1. Lift the console upper trim plate enough to access the shift handle retaining screw.
  2. Apply threadlock GM P/N 1234593 (Canadian P/N 10953488) to the shift lever set screw threads before reinstalling.

Tighten:  25 N.m (18 lb ft)
3 Trim Clip Retainer (Qty: 6)