Manual:HUMMER Hummer H3 Base 2010Page:20296 / 37523



Conditions for Running the DTC — 2010 Hummer H3 Base, Automatic Service Manual

Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

P0502

  • DTC P0120, P0121 or P0503 is not set.
  • The TP sensor angle is more than 12 percent.
  • The engine speed is 1,000-6,800 RPM for 8 seconds.
  • The system voltage is 10-18V.
  • Engine torque is 40-300 N.m (30-221 lb ft).

P0503

  • DTC P0502 is not set.
  • The engine speed is 450-6,800 RPM for 8 seconds.
  • The system voltage is 10-18V.
  • The time since the last gear change is 6 seconds or more.
  • The engine speed change is more than 500 RPM in 2 seconds.