Preparing For Calibration

Courtesy of AUDI OF AMERICA, LLC

1. Calibration Tool - Spacing Laser:VAS6350/2 
   • For distance measurement
   • Usage information. Refer to the Calibration Tool VAS6350 Owner's Manual.
2. Calibration Unit:VAS6350A 
3. Level
   • On the Calibration Unit:VAS6350A 
   • To check the horizontal position of the Calibration Unit:VAS6350A 
4. Catch Bracket
   • To mount the Calibration Tool - Spacing Laser:VAS6350/2  for the distance measurement
   • Distance to the Calibration Tool - Wheel Center Mountings:VAS6350/1  on the rear wheels: dimension -a- = 1700 ± 2 mm
5. Calibration Tool - Wheel Center Mountings:VAS6350/1 
   • With wheel bolt adapter and measuring paddle
6. Brand Emblem
   • The laser point is aligned to the center of the brand emblem
7. Calibration Tool - Lane Change Calibration Tool:VAS6350/4 
   • Is moved from one side of the measuring field to the other during calibration
   • When installed correctly, the vehicle electrical system voltage line must be connected at lower left of the calibration device (as seen in direction of travel)
8. Measuring Scale
   • For positioning the Calibration Tool - Lane Change Calibration Tool:VAS6350/4 
9. Calibration Tool - Linear Laser:VAS6350/3 
   • With "laser protective eyewear"
   • On the Calibration Unit:VAS6350A 
   • Switching on and off. Refer to Calibration Tool VA 6350 Owner's Manual.
10. Plastic Foot
    • Quantity: 3
    • Can be adjusted when setting the horizontal position of the Calibration Unit:VAS6350A