Manual:HUMMER Hummer H3 Base 2010Page:23311 / 37523



Air Inlet Valve Actuator Replacement (Left Hand Drive) — 2010 Hummer H3 Base, Automatic Service Manual

Air Inlet Valve Actuator Replacement (Left Hand Drive)

Fig 1: Air Inlet Valve Actuator (Left Hand Drive)
GM1559936Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the HVAC module assembly. Refer to Air Conditioning and Heater Module Assembly Removal and Installation (Left Hand Drive) or Air Conditioning and Heater Module Assembly Removal and Installation (Right Hand Drive) .
  2. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement (Right Hand Drive) or Air Inlet Assembly Replacement (Left Hand Drive) .
  3. Disconnect the recirculation actuator electrical connector.
1 Recirculation Housing Screw (Qty: 4)
CAUTION: Refer to Fastener Caution .

Tighten:  1.5 N.m (14 lb in)
2 Recirculation Housing
3 Recirculation Actuator Screw (Qty: 3)

Tighten:  1.5 N.m (13 lb in)
4 Recirculation Actuator
Procedure: 
Recalibrate the actuator. Refer to Actuator Recalibration .