Manual:HUMMER Hummer H3 Base 2010Page:24043 / 37523



Conditions for Setting the DTC — 2010 Hummer H3 Base, Automatic Service Manual

Conditions for Setting the DTC

  • The PPS detects the voltage at PPS sensor signal is less than 0.05 volt or greater than 4.5 volts for 500 milliseconds.
  • The PPS detects the voltage at PPS sensor 5-volt reference is less than 4.5 volts or greater than 9.1 volts for 500 milliseconds.
  • The PPS detects the amperage at PPS sensor low reference is 25 mA or greater for 500 milliseconds.