Manual:HUMMER Hummer H3 Base 2010Page:24213 / 37523



Circuit/System Verification — 2010 Hummer H3 Base, Automatic Service Manual

Circuit/System Verification

  1. Verify that the scan tool BCM VIN information matches the vehicle VIN.
    • If the VINs do not match, reprogram the BCM.
  2. Perform the SDM Setup SDM Part Number in BCM procedure.
  3. With a scan tool, verify DTC B1001 is not set as current.
    • If DTC B1001 is current replace the SDM.