Manual:AUDI A3 Premium, 4D Sedan 2015Page:33161 / 92758



A/C Service Station, Connecting For Measuring And Testing — 2015 Audi A3 Premium, 4D Sedan Service Manual

A/C Service Station, Connecting For Measuring And Testing

-- On vehicles with a high-voltage system, switch off (deactivate) the "auxiliary climate control" function. Refer to the Owner's Manual and Infotainment/MMI Operating Manual.

-- Switch off the ignition.

-- Connect the A/C service station to the power supply.

-- Assemble adapter set and screw to connection on low-pressure side.

-- Connect the quick-release coupling adapter to the charging hoses of service station (handwheels not screwed in/hand shut-off valve not open).

-- Switch on the service station and evacuate the charging hoses (only necessary if there is air in charging hoses).

-- Switch off the service station.

-- Remove the cap from the service connection/connection with valve (or remove low-pressure switch and bridge respective electrical connections).

-- Connect the service station via the service connections with the quick-release coupling adapters to the vehicle refrigerant circuit.

-- Install the handwheel on the quick-release coupling adapters only until valve is definitely open at refrigerant circuit connection (observe pressure gauge, do not strain valve).

-- Perform the planned tests and measurements.