Manual:HUMMER Hummer H3 Base 2010Page:4068 / 37523



Driver or Passenger Seat Back Cushion Cover and Pad Replacement — 2010 Hummer H3 Base, Automatic Service Manual

Driver or Passenger Seat Back Cushion Cover and Pad Replacement

Fig 1: Driver Or Passenger Seat Back Cushion Cover & Pad
GM1552295Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .

Preliminary Procedure

  1. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the seat back cushion panel. Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement .
  3. Remove the head restraint. Refer to Head Restraint Replacement .
  4. Remove the head restraint guides. Refer to Driver or Passenger Seat Head Restraint Guide Replacement .
1 Cover, Seat Back Cushion
Tip: 
  1. Disengage the j-channel that secures the seat back cushion cover and pad to the seat back frame.
  2. Remove the cushion cover and pad as an assembly from the seat back frame.
  3. Remove the hog rings that secure that seat back cover to the seat back pad.
2 Heater, Seat Back Cushion
Tip: 
  1. Disconnect the electrical connector.
  2. The heater assembly has an adhesive backing and should be peeled away from the seat cushion.
3 Pad, Seat Back Cushion