Manual:HUMMER Hummer H3 Base 2010Page:4082 / 37523



Rear Seat Cushion Cover and Pad Replacement (without H3T) — 2010 Hummer H3 Base, Automatic Service Manual

Rear Seat Cushion Cover and Pad Replacement (without H3T)

Fig 1: Rear Seat Cushion Cover & Pad (Without H3T)
GM1553844Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (without H3T)  or Rear Seat Cushion Replacement (with H3T) .
  2. Remove the rear seat cupholder. Refer to Rear Seat Cup Holder Replacement (without H3T)  or Rear Seat Cup Holder Replacement (with H3T) .
  3. Remove the rear seat cushion pull handles. Refer to Rear Seat Cushion Pull Handle Replacement .
1 Rear Seat Cushion Hinge Bracket Screw (Qty: 8)
CAUTION: Refer to Fastener Caution .

Tighten:  11 N.m (97 lb in)
2 Rear Seat Cushion Hinge Bracket (Qty: 4)
3 Rear Seat Cushion Hinge
4 Rear Seat Cushion Panel
5 Rear Seat Cushion Cover

Procedure

  1. Disconnect the seat cover J-channel from the seat cushion frame.
  2. Remove the hog rings that secure the seat cushion pad to the seat cushion cover.
6 Seat Cushion Pad