Manual:LAND ROVER Range Rover Supercharged 2015Page:41746 / 73010



Front Suspension: Specifications — 2015 Land Rover Range Rover Supercharged Service Manual

Front Suspension: Specifications

TORQUE SPECIFICATIONS

DESCRIPTION NM LB-FT
Stabilizer bar clamp bolts    
Stage 1 60 44
Stage 2 120 88
Stabilizer bar link nuts (1) 185 136
Dynamic response actuator clamp nuts 110 81
Dynamic response actuator link nuts 185 136
Upper control arm to body nuts    
Stage 1 24 18
Stage 2 Then a further 60 degrees Then a further 60 degrees
Upper ball joint knuckle nut 60 44
Air spring mounting nuts 40 29
Air spring to yoke bolt 95 70
Rear lower control arm to yoke bolt (2)    
Stage 1 100 74
Stage 2 Then a further 240 degrees Then a further 240 degrees
Rear lower control arm to subframe bolt (2)    
Stage 1 100 74
Stage 2 Then a further 360 degrees Then a further 360 degrees
Front lower control arm to subframe bolt (2)    
Stage 1 100 59
Stage 2 Then a further 360 degrees Then a further 300 degrees
Rear lower control arm ball joint nut (1) 290 214
Front lower control arm ball joint nut (1) 290 214
Subframe to body front bolts (1)    
Stage 1 100 74
Stage 2 Then a further 300 degrees Then a further 300 degrees
Subframe to body center bolts (1)    
Stage 1 100 74
Stage 2 Then a further 240 degrees Then a further 240 degrees
Subframe to body rear bolts +    
Stage 1 70 52
Stage 2 Then a further 120 degrees Then a further 120 degrees
(1) New nut/bolts must be installed
(2) New nut and bolt must be installed
FRONT WHEEL HUB RUNOUT

DESCRIPTION MM
Front wheel hub 0.0135mm
Runout must be measured 2.5mm from the outer diameter of the front wheel hub.