Removal And Installation: Removal
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Always carry out the cleaning process before carrying out any repairs to the fuel injection system components. Failure to follow this instruction may result in foreign matter ingress to the fuel injection system.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: PETROL AND PETROL-ETHANOL FUEL SYSTEMS HEALTH AND SAFETY PRECAUTIONS
- Refer to the appropriate fuel system pressure release.
- Disconnect the battery ground cable.
Refer to: SPECIFICATIONS
-
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
- Refer to: ENGINE UNDERSHIELD
-
Refer to: FUEL INJECTION COMPONENT CLEANING
- Refer to: AIR CLEANER OUTLET PIPE T-CONNECTOR
-
CAUTION: Be prepared to collect escaping coolant.
-
WARNING: Be prepared to collect escaping fluids.
-
CAUTION: Be prepared to collect escaping fluids.
-
CAUTION: Be prepared to collect escaping fluids.
-
CAUTION: Be prepared to collect escaping fluids.
-
CAUTION: Be prepared to collect escaping fluids.
-
CAUTION: Be prepared to collect escaping fluids.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: GENERATOR - V8 S/C 5.0L PETROL
-
NOTE: Engine shown removed for clarity.
-
CAUTION: Be prepared to collect escaping fluids.NOTE: Engine shown removed for clarity.
-
CAUTION: Be prepared to collect escaping fluids.
-
CAUTION: Be prepared to collect escaping fluids.
Loosen the Torx screws a turn each at a time.
-
CAUTION: Be prepared to collect escaping fluids.
