Removal And Installation: Removal
NOTE:
- Removal steps in this procedure may contain installation details.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Refer to: SECONDARY BULKHEAD RIGHT PANEL .
- Refer to: BRAKE MASTER CYLINDER - RHD .
Release the instrument panel lower section.
Remove the brake booster push rod clevis pin.
- Release the retaining nut.
- Torque Specification: 25 Nm
Release the brake booster vacuum hose.
-
CAUTION: Care must be taken not to damage the component.
Release the brake lines.
Remove the brake booster.
