Air Cleaners
| ITEM | DESCRIPTION |
|---|---|
| 1 | Screw (6 off) |
| 2 | Lid |
| 3 | Mass Air Flow and Temperature (MAFT) Sensor |
| 4 | Air Outlet |
| 5 | Base |
| 6 | Isolator |
| 7 | Drain Valve |
| 8 | Air Intake |
| 9 | Isolators |
An air cleaner is located in each front corner of the engine compartment. Three spigots fitted with isolator bushes locate each air cleaner in holes in the related front inner fender and front suspension housing.
Each air cleaner consists of a filter element installed in a base and enclosed with a lid secured by six screws. The filter element is a pleated, paper type with an integral seal. Air intake and outlet connections are incorporated into the base and lid respectively. The bottom of the base incorporates a drain valve to prevent the accumulation of water in the air cleaner.
The air outlet connection of each air cleaner incorporates a MAFT (Mass Air Flow and Temperature) sensor. The sensors are connected to the ECM (Engine Control Module). For additional information, refer to: ELECTRONIC ENGINE CONTROLS (DESCRIPTION AND OPERATION) .