Removal And Installation: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
- Disconnect the battery ground cable.
Refer to: SPECIFICATIONS .
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: COOLING SYSTEM PARTIAL DRAINING, FILLING AND BLEEDING .
- Refer to: SECONDARY BULKHEAD CENTER PANEL - V6 S/C 3.0L PETROL .
- Refer to: FUEL INJECTION COMPONENT CLEANING .
- Refer to the appropriate Fuel System Pressure Release service information.
-
CAUTION: Be prepared to collect escaping coolant.
-
CAUTION: Be prepared to collect escaping coolant.
-
CAUTION: Be prepared to collect escaping fluids.
-
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.CAUTION: Make sure that the fuel line union does not rotate.
-
NOTE: Remove and discard the gasket.
-
NOTE: Do not disassemble further if the component is removed for access only.















