Battery, Removing And Installing, Vehicles With High Voltage System: Procedure

-- Connect the :Vehicle Diagnostic Tester  .

-- Choose operation mode Diagnosis  and start the diagnosis.

-- Select the tab test plan  .

-- Select select individual tests  and choose the following sequence.

• Body
• Electrical Equipment
• 01 - OBD-capable systems
• 19 - Data Bus On Board Diagnostic Interface - J533
• 19 - Data Bus On Board Diagnostic Interface functions
• 19 - Adapting
• 19 - Adapt battery

When the battery is connected, the following steps must be performed

• Activate the one-touch up/one-touch down power window regulators. Refer to the Owner's Manual.
• Check DTC memories of all control modules and erase "Undervoltage" DTC if necessary, using the :Vehicle Diagnostic Tester  .