Fiber-Optic Cable, Preparing With The Fiber-Optic Conductor Repair Set :Vas6223A: Notes
Special Tools And Workshop Equipment Required
- Fiber Optic Repair Set:VAS6223B
- Hose Cutting Pliers:VAS6228
Do not bend the fiber-optic cable too much. The bending radius must be no less than 25 mm.
Fiber optic cables must not be routed over sharp edges.
The fiber-optic cable must not be dirty or touched with bare fingers.
Fiber optic cables may not be heated.
It is not permitted to twist together 2 fiber optic cables or one fiber optic cable with a copper wire.
Protect the connector and the connection box from dust. Place the cap on the trunk.
Special Tools And Workshop Equipment Required
- Fiber-Optic Conductor Repair Set:VAS6223A
- Hose Cutting Pliers:VAS6228
- Vehicle Diagnostic Tester
Do not bend the fiber-optic cable too much. The bending radius must be no less than 25 mm.
Fiber optic cables must not be routed over sharp edges.
The fiber-optic cable must not be dirty or touched with bare fingers.
Fiber optic cables may not be heated.
It is not permitted to twist together 2 fiber optic cables or one fiber optic cable with a copper wire.
Protect the connector and the connection box from dust. Place the cap on the trunk.
Mount Tool Head for the :VAS6223/1 .
-- Remove the locking pin -arrows-.
-- Remove the tool set -arrow- and pull the locking pin back.