Manual:LAND ROVER Range Rover Supercharged 2015Page:48660 / 73010



Humming Noise From The Accessory Drive Belt Idler Pulley (LTB00780V2) — 2015 Land Rover Range Rover Supercharged Service Manual

Humming Noise From The Accessory Drive Belt Idler Pulley (LTB00780V2)

WARNING: This page is about the Range Rover Base, which is a different variant/trim than selected.
Publication date: 2019-01-09
Reference number: LTB00780V2
Supersedes refnos: LTB00780NAS1, LTB00780NAS3, LTB00780NAS5, LTB00780NAS7

HUMMING NOISE FROM THE ACCESSORY DRIVE BELT IDLER PULLEY

HUMMING NOISE FROM THE ACCESSORY DRIVE BELT IDLER PULLEY

TECHNICAL SERVICE BULLETIN

Reference Number(s): LTB00780NAS7, Date of Issue:  January 09, 2019
LAND ROVER: 2010-2016 LR4 (LA); 2014-2016 Range Rover Sport (LW); 2013-2016 Range Rover (LG); 2010-2013 Range Rover Sport (LS); 2010-2012 Range Rover (LM)
SECTION: 303-05B/-05C
AFFECTED VEHICLE RANGE: See The Chart Below

AFFECTED VEHICLE RANGE

G00576386

MARKETS

NORTH AMERICA

CONDITION SUMMARY

SITUATION: 

A humming noise may be evident from the engine at idle.

CAUSE: 

This may be caused by dust and/or water ingress to the accessory drive belt idler pulley bearing.

ACTION: 

Should a customer express this concern, follow the Workshop Procedure below.

PARTS

PARTS INFORMATION

PART NUMBER DESCRIPTION QUANTITY
LR099573 Idler pulley with bracket 1

TOOLS

Refer to Workshop Manual/Service Instruction for any required special tools.

WARRANTY

NOTE:
  • Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to JLR claims submission system to obtain the latest repair time.
  • The JLR Claims Submission System requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
WARRANTY INFORMATION

DESCRIPTION SRO TIME (HOURS) CONDITION CODE CAUSAL PART
Idler pulley and bracket - Right - Accessory drive belt - Renew - LR4 (L319; V6 3.0L S/C Petrol) 12.10.52 0.2 42 LR010689
Idler pulley and bracket - Right - Accessory drive belt - Renew - LR4 (L319; V8 5.0L Petrol) 12.10.52 0.3 42 LR010689
Idler pulley and bracket - Right - Accessory drive belt - Renew - Range Rover Sport (L494) 12.10.52 0.2 42 LR010689
Idler pulley and bracket - Right - Accessory drive belt - Renew - Range Rover Sport (L320) 12.10.52 0.3 42 LR010689
Idler pulley and bracket - Right - Accessory drive belt - Renew - Range Rover (L405) 12.10.52 0.2 42 LR010689
Idler pulley and bracket - Right - Accessory drive belt - Renew - Range Rover (L322) 12.10.52 0.2 42 LR010689
NOTE: Normal Warranty procedures apply.

WORKSHOP PROCEDURE

CAUTION: The idler pulley with bracket MUST be replaced as a set. Installing the new idler pulley onto the old bracket or the new bracket to the old Idler pulley could introduce a misalignment.
  1. Remove the T-connector from the air cleaner outlet pipe (see TOPIx Workshop Manual section 303-12: Intake Air Distribution and Filtering).
  2. NOTE: Note the installed position of the accessory drive belt.
    G12221916

    Loosen the accessory drive belt and remove from the idler pulley.

  3. G12221917

    Remove the accessory drive belt Idler pulley and bracket assembly.

    • Retain the fasteners.
  4. CAUTION: The idler pulley with bracket MUST be replaced as a set. Installing the new idler pulley onto the old bracket or the new bracket to the old Idler pulley could introduce a misalignment.
    G12221918

    Install the new accessory drive belt pulley and bracket assembly.

    • Torque: 25 Nm 
  5. CAUTION: Make sure that the accessory drive belt is correctly located on each pulley.

    Install the accessory drive belt.

  6. Install the T-connector from the air cleaner outlet pipe (see TOPIx Workshop Manual section 303-12: Intake Air Distribution and Filtering).