Manual:LAND ROVER Range Rover Supercharged 2015Page:48712 / 73010



Symptom Driven Diagnostics (SDD) Initiates A 'Scan DISK' On Every Restart (SSM72274) — 2015 Land Rover Range Rover Supercharged Service Manual

Symptom Driven Diagnostics (SDD) Initiates A 'Scan DISK' On Every Restart (SSM72274)

WARNING: This page is about the Range Rover Base, which is a different variant/trim than selected.
Publication date: 2015-06-17
Reference number: SSM72274

SYMPTOM DRIVEN DIAGNOSTICS (SDD) INITIATES A 'SCAN DISK' ON EVERY RESTART

SYMPTOM DRIVEN DIAGNOSTICS (SDD) INITIATES A 'SCAN DISK' ON EVERY RESTART

TECHNICAL SERVICE BULLETIN

Reference Number(s): SSM72274, Date of Issue:  17-Jun-2015
LAND ROVER: Defender/L316, Discovery Sport/L550, LR2/L359, LR3/L319, LR4/L319, Range Rover/L322, Range Rover/L405, Range Rover Evoque/L538, Range Rover Sport/L320, Range Rover Sport/L494
CATEGORY: Diagnostic Software Hardware

SERVICE INFORMATION

Symptom  000101 Diagnostic Concerns

Content 

ISSUE

Symptom Driven Diagnostics (SDD) initiates a 'Scan Disk' every time the SDD machine is started.

CAUSE

During general machine maintenance a user selects to run 'Scan Disk' on restart from within SDD, in doing this a setting is changed that allows the Scan Disk to complete. This setting is not removed after the Scan Disk has completed causing the Scan Disk to initiate on every restart.

ACTION

This workaround will load a software file to SDD using the Manual Patch Update process:

  1. Disconnect any communication devices from the SDD machine.
  2. Login to SDD
  3. Select 'Continue' on the SDD Warning screen.
  4. Select 'Manual VIN Read'
  5. Select 'Settings' tab on the top right of the screen.
  6. Select 'System Utilities' tab on the top middle of the screen
  7. Select 'Manual Patch Update'.
  8. A pop-up will be displayed for Manual patch selection dialog box.
  9. Enter 'MP_JL_R0002'  in the Manual patch selection dialog box.
  10. Select 'OK'
  11. The Software Manager wizard will then download the fix file from the server.
  12. Select 'OK' in the Manual patch update information pop up.
  13. Select 'OK' when the "Please shut down SDD before continuing" message is displayed.
  14. 'Please wait' message is displayed.
  15. Select 'OK' when the "Package has been installed" message is displayed.
  16. Select 'OK' in the Manual patch update information pop up.
  17. Close the SDD program
  18. Start a new SDD session
  1. 21. Restart the SDD machine.

    A further SSM will be released advising the SDD software level that a permanent solution will be released on.