VCT SOLENOID DOES NOT FIT THE VEHICLE HARNESS - 3l AJ126 AND 5L AJ133 (SSM72149)
Reference number: SSM72149
VCT SOLENOID DOES NOT FIT THE VEHICLE HARNESS - 3L AJ126 AND 5L AJ133
TECHNICAL SERVICE BULLETIN
| LAND ROVER: | LR4 / L319; Range Rover / L322; Range Rover / L405; Range Rover Sport / L320; Range Rover Sport / L494 |
| SECTION: | Driveability |
SERVICE INFORMATION
Symptom 608000 Runs Rough
Content
ISSUE
A new VCT solenoid has been fitted to a 3.0L AJ126 or 5.0L AJ133 engine which requires a link harness in order to be installed on vehicles built with the prior part.
CAUSE
The VCT solenoid design changed, and the electrical connector on the VCT solenoid is a different size.
ACTION
A link harness is available, part number LR061705, to join the existing vehicle harness to the new VCT solenoid connector. Please refer to attachment: 1.pdf
- If the VCT solenoid to be replaced looks like part 'A' then a link harness is not needed.
- If the part to be replaced looks like part 'B' please also order a link harness.
Technicians - Please rate this SSM and provide comments so that future communications can be improved.
1 = Poor - Basic information provided - The SSM does not help me resolve the customer concern.
3 = Average - Adequate information provided - The SSM partially helps me resolve the customer concern.
5 = Excellent - All required information provided to resolve the customer concern.
