Manual:LAND ROVER Range Rover Supercharged 2015Page:49377 / 73010



Service Action: Oxygen (02) Sensors (Q514NAS3) — 2015 Land Rover Range Rover Supercharged Service Manual

Service Action: Oxygen (02) Sensors (Q514NAS3)

WARNING: This page is about the Range Rover Base, which is a different variant/trim than selected.
Publication date: 2016-04-14
Reference number: Q514NAS3
Supersedes refnos: Q514NAS2

SERVICE ACTION: OXYGEN (02) SENSORS

SERVICE ACTION: OXYGEN (02) SENSORS

TECHNICAL SERVICE BULLETIN

Reference Number(s): Q514NAS3, Date of Issue:  June 07, 2016
LAND ROVER: 2014-2016 LR4 (LA); 2014-2016 Range Rover Sport (LW); 2013-2016 Range Rover (LG)
SECTION: 303-00
AFFECTED VEHICLES: LR4 (LA) Model Year: 2014-2016 VIN: 679426-784564 Assembly Plant: Solihull V6 S/C 3.0L Petrol; Range Rover Sport (LW) Model Year: 2014-2016 VIN: 001154-542163 Assembly Plant: Solihull V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol; Range Rover Sport (LW) Model Year: 2014-2016 VIN: 600009-630153 Assembly Plant: Solihull V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol; Range Rover (LG) Model Year: 2013-2016 VIN: 001204-243370 Assembly Plant: Solihull V6 S/C 3.0L Petrol/V8 5.0L Petrol/V8 S/C 5.0L Petrol

MARKETS

NAS

CONDITION SUMMARY

Situation:  To address concerns with the correct operation of the Oxygen (O2) Sensors, updated Engine Control Module (ECM) software is required on the models, model years, engine variants, and Vehicle Identification Number (VIN) ranges as listed in the Affected Vehicle Range.

NOTE: This Service Instruction will not repair a pre-existing CEL or DTC. Those should be investigated and repaired under a separate warranty claim. In the event there is a DTC relating to oxygen sensor operation, it may be covered by LTB00671.

Action:  Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale  pending completion of the Service Instruction detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must  have it completed prior to vehicle handover to the customer.

Affected vehicles already in the hands of customers should be updated at the next available opportunity.

PARTS

No parts required.

SPECIAL TOOLS

NOTE: This Active Bulletin will display a functional programming shortcut if accessed within a diagnostic session.
  • SDD with latest SDD-DVD and Calibration File
  • Jaguar Land Rover-approved Midtronics Battery Power Supply

WARRANTY

NOTE: Check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action.

At the time of confirming a booking for vehicle repair, ensure that all outstanding Recalls and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.

Warranty claims must be submitted quoting Program Code Q514 together with the relevant Option Code from the table. SRO and parts information is included for information only. The Option Code(s) that allows for the drive in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken.

This program is valid for a limited time only. Warranty claims with a repair date prior to the 30 September 2017 closure date must be submitted or payment within 30 calendar days of completion of the repair.

Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time.

WARRANTY INFORMATION

PROGRAM CODE OPTION CODE DESCRIPTION SRO TIME (HOURS) PARTS/SUNDRY CODE QTY./VALUE
Q514 B Configure the PCM 12.90.13 0.20 - -
Q514 C Configure the PCM
Drive in/drive out		 12.90.13
02.02.02		 0.20
0.20		 -
-		 -
-

Normal Warranty policies and procedures apply.

SERVICE INSTRUCTION

CAUTION: A Jaguar Land Rover-approved Midtronics battery power supply must be connected to the vehicle battery during diagnosis / module programming.
CAUTION: Ensure all ignition ON/OFF requests are carried out; failure to perform these steps may cause damage to control modules in the vehicle.
NOTE: The Jaguar Land Rover-approved diagnostic tool must be loaded with DVD145.06 v.239 or later.
  1. Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.
  2. Turn ignition ON (engine not running).
  3. Connect the Jaguar Land Rover-approved diagnostic tool to the vehicle and begin a new session.
  4. Follow the on-screen prompts, allowing the diagnostic tool to read the VIN and identify the vehicle and initiating the data collect sequence.
  5. Select 'Diagnosis  ' from the Session Type screen.
  6. Select the 'Selected Symptoms  ' tab, and then select:
    • Powertrain > Engine system > Engine performance
  7. Select the 'Recommendations  ' tab.
  8. Read and close any publication from the list of recommended candidates to expose the Extras tab.
  9. Select the 'Extras  ' tab.
  10. From the list of recommended candidates, select 'Run  ' to perform the 'Configure existing module - Powertrain control module  ' option.
  11. Follow all on-screen instructions to complete this task, ensuring all Diagnostic Trouble Codes (DTC) are cleared.
  12. When all tasks are complete, select the 'Session  ' tab and then select the 'Close Session  ' option.
  13. Disconnect the diagnostic tool and battery power supply from the vehicle.