Manual:LAND ROVER Range Rover Supercharged 2015Page:49469 / 73010



Safety Recall: Occupant Classification Sensor System 'Passenger Airbag OFF' Lamp Illuminated (P059NAS1) — 2015 Land Rover Range Rover Supercharged Service Manual

Safety Recall: Occupant Classification Sensor System 'Passenger Airbag OFF' Lamp Illuminated (P059NAS1)

WARNING: This page is about the Range Rover Base, which is a different variant/trim than selected.
Publication date: 2015-02-18
Reference number: P059NAS1

SAFETY RECALL: OCCUPANT CLASSIFICATION SENSOR SYSTEM 'PASSENGER AIRBAG OFF' LAMP ILLUMINATED

SAFETY RECALL: OCCUPANT CLASSIFICATION SENSOR SYSTEM 'PASSENGER AIRBAG OFF' LAMP ILLUMINATED

SERVICE CAMPAIGN BULLETIN

Reference Number(s): P059NAS1, Date of Issue:  February 18, 2015
LAND ROVER: 2014-2015 Range Rover Sport (LW); 2013-2015 Range Rover (LG)
SECTION: 501-20B
AFFECTED VEHICLES: Range Rover Sport (LW) Model Year: 2014-2015 VIN: EA000002-FA520157; Range Rover Sport (LW) Model Year: 2014-2015 VIN: EA600188-FA616251; Range Rover (LG) Model Year: 2013-2015 VIN: DA000014-FA217862

MARKETS

NAS

CONDITION SUMMARY

Situation:  A concern has been identified on certain 2014-2015 model year Land Rover Range Rover Sport and 2013-2015 model year Range Rover vehicles where the Occupant Classification Sensor (OCS) may not function correctly at all times. A light weight (5th percentile female) adult passenger could be mis-classified and the passenger airbag disabled as a result when the vehicle is being driven on very smooth surface roads for a period of time. The 'Passenger Airbag OFF' lamp is illuminated in this situation.

Action:  Retailers are required to HOLD  only affected new vehicles that are within your control and refrain from releasing the vehicles for new or used vehicle sale pending completion of the rework action detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must  have it completed prior to vehicle handover to the customer.

Affected vehicles already in the hands of customers should be updated at the next available opportunity.

PARTS

No parts required

SPECIAL TOOLS

NOTE: this document is an 'Active Bulletin' that will display a functional programming shortcut if accessed within a diagnostic session using SDD.

SDD with latest SDD-DVD and Calibration File

Jaguar Land Rover-approved Midtronics Battery Power Supply

WARRANTY

NOTE: check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action.

At the time of confirming a booking for vehicle repair, ensure that all outstanding Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.

Warranty claims must be submitted quoting Program Code 'P059'  together with the relevant Option Code from the table. The SRO and part information listed have been included for information only. The Option Code(s) that allows for the drive in / drive out allowance may only be claimed if the vehicle is brought into the workshop for this action alone to be undertaken.

Repair procedures are under constant review, and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time.

PROGRAM CODE OPTION CODE DESCRIPTION SRO TIME (HOURS) PARTS / SUNDRY CODE QTY. / VALUE
P059 B Configure restraints Occupant Classification Sensor control module 76.90.03 0.20 - -
P059 C Configure restraints Occupant Classification Sensor control module Drive in/drive out 76.90.03
02.02.02
0.20
0.20
-
-
-
-

Normal Warranty policies and procedures apply

SERVICE INSTRUCTION

CAUTION: a Jaguar Land Rover-approved Midtronics battery power supply must be connected to the vehicle battery during SDD diagnosis / module programming.
CAUTION: ensure all ignition 'ON' / ignition 'OFF' requests are carried out; failure to perform these steps may cause damage to control modules in the vehicle.
NOTE: SDD must be loaded with DVD139.17 v.200 or later.
  1. Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.
  2. Turn ignition 'ON' (engine not running).
  3. Connect the Symptom Driven Diagnostics (SDD) system to the vehicle and begin a new session.
  4. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle and initiating the data collect sequence.
  5. Select 'Diagnosis' from the Session Type screen.
  6. Select the 'Selected Symptoms' tab, and then select the following:
    • Electrical > Instruments > Warning lamps > Air bag warning lamp > Lamp illuminated
  7. Read and close any publication from the list of recommended candidates to expose the 'Extras' tab.
  8. Select the 'Extras' tab.
  9. From the Recommendations tab, select Run  to perform the 'Configure existing module - Restraints occupant classification system control module' option.
  10. Follow all on-screen instructions to complete this task, ensuring all DTCs are cleared.
  11. Exit the current session.
  12. Disconnect the SDD and the battery power supply from the vehicle.