Sealing Flange With Sensor Wheel, Removing

Courtesy of AUDI OF AMERICA, LLC

• The transmission is removed.

-- Remove the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .

• For better illustration, the following procedures are shown with the engine removed.

-- Remove the intermediate plate -1- from the alignment sleeves -A arrows-.

-- Guide the intermediate plate upward. While doing so, remove the retaining tab -arrow B- from the opening behind the sealing flange -2-.

-- Turn the crankshaft at the toothed belt sprocket bolt until the crankshaft is at "TDC" as shown.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the oil pan. Refer to OVERVIEW - OIL PAN/OIL PUMP .

-- Remove the Engine Speed Sensor -G28-. Refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- for the sealing flange -1-.

Courtesy of AUDI OF AMERICA, LLC

-- To press, install the three M6 x 35 bolts -arrows- into the sealing flange alternating from side to side maximum ¹ /₂ turn.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the sealing flange -1- together with the sensor wheel -2-.