Fuel Level Sensor 2 -G169-, Removing And Installing: Removing
-- Pay attention to all safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to CLEAN WORKING CONDITIONS .
-- Move the front seats all the way forward.
-- Switch off the ignition.
-- Remove the rear bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLINGRear Seats .
Danger due to escaping fuel.
- To prevent large quantities of fuel from leaking when removing the fuel level sensor, the fuel tank may only be a maximum of 1 /4 full.
-- If required, drain the fuel tank. Refer to FUEL TANK, DRAINING .
-- Unclip the left sealing flange cover -1- at the tabs in direction of -arrows- using the :3409 .
-- Unlock and disconnect the connector -1- on the All Wheel Drive clutch.
-- Depending on the version, disconnect the connector -2- on the sealing flange by unlocking the connector safety catch.
Danger due to escaping fuel.
- To prevent large quantities of fuel from leaking when removing the fuel level sensor, the fuel tank may only be a maximum of 1 /4 full.
-- Remove the locking ring using the :T10202 .
-- Remove the sealing flange and seal at the fuel tank opening.
-- Reach through the opening in the fuel tank, release the connector retainer -arrow- and disconnect the connector -1-.
-- Reach through the opening in the fuel tank, release the connector safety catches in direction of -arrows A- and press the connector -1- out of the retainer in direction of -arrow B-.
-- Reach through the opening in the fuel tank, release the tab -2- on the retainers and at the same time remove the Fuel Level Sensor 2 -G169- upward in direction of -arrow C-.




