Manual:AUDI A3 Prestige, 2D Convertible 2015Page:60166 / 85466



Rear Coolant Pipe, Removing And Installing: Installing — 2015 Audi A3 Prestige, 2D Convertible Service Manual

Rear Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install In Reverse Order Of Removal. Note The Following: 

Pay attention to the tightening sequence (leaks due to installing the coolant pipe under stress):

  • First tighten the bolt -2- to 10 Nm. 
  • Then tighten the nut -3- to 10 Nm. 
    GWWA19-11583Courtesy of AUDI OF AMERICA, LLC
CAUTION:

- Fill the coolant system using only the Vehicle Diagnostic Tester.

-- Fill and bleed the coolant circuit. Refer to COOLANT, DRAINING AND FILLING WITHOUT COOLING SYSTEM CHARGE KIT - ELECTRIC VACUUM PUMP:VAS6096/2 .