Manual:HUMMER Hummer H3 Base 2010Page:6293 / 37523



Rear Brake Caliper Mount Plate Replacement — 2010 Hummer H3 Base, Automatic Service Manual

Rear Brake Caliper Mount Plate Replacement

Fig 1: Rear Brake Caliper Mount Plate
GM1562610Courtesy of GENERAL MOTORS CORP.
Callout Component Name
WARNING: Refer to Brake Dust Warning .

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the axle shaft. Refer to Rear Axle Shaft Replacement .
  4. Remove the park brake shoe. Refer to Parking Brake Shoe Replacement .
1 Park Brake Actuator
2 Park Brake Cable Bracket Nut (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  48 N.m (35 lb ft)
3 Park Brake Rear Cable Bracket
4 Rear Brake Caliper Mounting Plate Bolt (Qty: 4)

Tighten:  135 N.m (100 lb ft)
5 Rear Brake Caliper Mounting Plate