Manual:HUMMER Hummer H3 Base 2010Page:6770 / 37523



Front Axle Lubricant Replacement — 2010 Hummer H3 Base, Automatic Service Manual

Front Axle Lubricant Replacement

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Ensure that the vehicle is level.
  3. Remove the engine protection shield (EPS), if equipped. Refer to Engine Shield Replacement .
  4. Remove the drain plug.
  5. Drain axle fluid into a suitable container.
    6. CAUTION: Refer to Fastener Caution .
  6. Install the drain plug.

    Tighten:  Tighten the drain plug to 32 N.m (24 lb ft).

  7. Remove the fill plug.
  8. Fill the drive axle with the proper fluid. Refer to Fluid and Lubricant Recommendations (USA and Canada) .
  9. Inspect the fluid level. Refer to Front Axle Lubricant Level Inspection .
  10. Install the fill plug.

    Tighten:  Tighten the fill plug to 32 N.m (24 lb ft).

  11. Install the EPS, if equipped. Refer to Engine Shield Replacement .
  12. Lower the vehicle.