Manual:HUMMER Hummer H3 Base 2010Page:9952 / 37523



Coolant Recovery Reservoir Replacement (Left Hand Drive) — 2010 Hummer H3 Base, Automatic Service Manual

Coolant Recovery Reservoir Replacement (Left Hand Drive)

Fig 1: Coolant Recovery Reservoir (Left Hand Drive)
GM2005357Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
1 Coolant Reservoir Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Procedure

  1. Roll the container assembly forward.
  2. Disconnect both washer pump electrical connectors.
  3. Disconnect both washer pump jumper hoses at the air inlet grille panel connections, if equipped.
  4. Contain any lost washer solvent fluid in a clean suitable container.
  5. Disconnect and secure the coolant container overflow hose.
  6. Transfer all parts as needed.

Tighten:  9 N.m (80 lb in)
2 Coolant Reservoir