B11AB

Code

LAND ROVER B — Body

Leisure button

Brand: LAND ROVER

Type: B — Body

Views: UK: 13 EN: 25 RU: 25

AI status

Completed

ready

Completed 100%

Page language: EN

Causes

Failed or sticking Leisure pushbutton/switch
Damaged, corroded or disconnected connector at the switch
Broken or shorted wiring between the switch and body control module (BCM)
Poor ground or missing reference voltage to the switch
Blown fuse or faulty relay supplying the circuit
Body Control Module input fault or internal failure

Symptoms

Leisure mode button does not respond or intermittent operation
Leisure mode functions fail to engage when button is pressed
No illumination or feedback from the button/indicator
Warning or information message on cluster regarding leisure function
DTC remains stored or returns after clearing codes

What to check

Retrieve and record all stored and pending DTCs and freeze frame data with a capable diagnostic tool
Check for related communication codes (U-codes) that could affect the BCM
Visually inspect the Leisure button, surrounding trim, and connector for damage, water ingress or corrosion
Verify relevant fuses and relays for the circuit
Operate the button while monitoring live data to see if a switch input changes state
Backprobe the switch connector and check reference voltage and ground with a multimeter

Signal parameters

Switch input: typically a digital input (open/closed) seen as a change between reference voltage and ground when pressed
Reference voltage: commonly 5V (model-dependent) at switch feed — verify with vehicle wiring diagram
Switch continuity: closed circuit when button pressed (or open depending on circuit design) — confirm with multimeter/ohmmeter
CAN/bus: Leisure state may be reported as a CAN message; verify message receipt and correct value in live data
Expected behavior: pressing the button should toggle the input state and generate corresponding status in body control module live data (model-dependent)

Diagnostic algorithm

Connect an OEM-level scan tool and read all DTCs, module status and freeze frame data; note occurrence frequency and related codes
Attempt to reproduce the fault by operating the Leisure button while watching live data for the switch input or related CAN message
Perform visual inspection of the button assembly and connector; look for contamination, water, or physical damage
With ignition on, backprobe the switch connector: verify reference supply voltage, ground continuity, and that the switch changes state when pressed
If reference voltages are missing, trace back to fuse/relay and check/replace as required
If voltages are correct at the switch but the BCM does not see a change, perform continuity testing on wiring between switch and BCM and check connector pins for damage
Wiggle test the harness while operating the button to identify intermittent faults
If wiring and switch test good, check BCM inputs; consult wiring diagram to identify pin and test or substitute known-good module if possible (follow manufacturer procedures)
Check for software updates or Technical Service Bulletins affecting Leisure function and reprogram modules if advised
Clear codes and retest operations over a drive cycle to confirm repair; document if intermittent or reoccurs

Likely causes

Faulty Leisure pushbutton/switch
Wiring harness/connector fault (open, short to ground/power, corrosion)
Faulty BCM input or module internal fault
Communication error on CAN bus affecting the BCM
Blown fuse or poor ground connection

Fault status

⚠️ Status

Leisure button circuit malfunction detected — invalid, open or shorted signal to body control module; button may be inoperative and leisure functions unavailable.

🟡 Repair difficulty: Medium

⏱️ Diagnostic time: 0.5 - 2.0 hours

Similar codes

Repair manuals

Manual library for LAND ROVER

320

Browse 320 LAND ROVER manuals: repair procedures, diagnostics, wiring diagrams, component locations, service data and Labor Times by year, model and trim.

LAND ROVER

Your experience will help others

+100 karma for a short comment :)

Was this AI description helpful?

Your feedback helps improve AI descriptions.

👍 Like 0 👎 Dislike 0

Send to email